The laser module will move quickly during operation. It is recommended that the laser cutter be placed on a smooth, wide and tidy table.
When installing multiple screws at the same time, it is recommended to pre-lock the screws on the outermost corners first, then pre-lock the remaining screws, and finally lock all the screws in order of pre-locking.
When installing screws with the socket key, it is recommended that the screws be screwed into the screw holes with the long handle and then locked with the short handle. To remove the screws, just follow the opposite procedure.
Please organize and store cables in a timely manner to prevent them from becoming tangled and knotted or tripping people up.
When the machine is powered on, do not plug or unplug any connecting cables without special instructions.
