Material Settings for TOOCAA Machines
TOOCAA laser engravers can cut and engrave a variety of materials, from thin materials like tissue paper to thick materials like leather and wood panels. Use your imagination!
Select a laser engraver model from the list below to see a list of materials available for that model. Select the tab for the material you want to learn more about, and you'll see recommended settings for power, speed, process, and more.
| Laser Power | Engraving Size | Processing Mode | Material | Thickness (mm) | Power (%)/Speed (mm/min)/Pass |
|---|---|---|---|---|---|
| 10W | 395mm*415mm | Engraving | Basswood | 2 | 40/3000/1 |
| 10W | 395mm*415mm | Engraving | Bamboo | 5 | 40/3000/1 |
| 10W | 395mm*415mm | Engraving | Kraft paper | 0.2 | 25/3000/1 |
| 10W | 395mm*415mm | Engraving | Red card paper | 0.2 | 25/3000/1 |
| 10W | 395mm*415mm | Engraving | Red felt | 0.8 | 15/3000/1 |
| 10W | 395mm*415mm | Engraving | Brown leather | 0.65 | 20/3000/1 |
| 10W | 395mm*415mm | Engraving | Black acrylic | 4.5 | 50/3000/1 |
| 10W | 395mm*415mm | Engraving | Anodized aluminum | 3 | 100/200/1 |
| 10W | 395mm*415mm | Engraving | Stainless steel | 2 | 100/500/1 |
| 10W | 395mm*415mm | Engraving | White Tile Painted Black | 6 | 95/3800/1 |
| 10W | 395mm*415mm | Cutting | Basswood | 2 | 100/350/3 |
| 10W | 395mm*415mm | Cutting | Basswood | 4 | 100/200/1 |
| 10W | 395mm*415mm | Cutting | Basswood | 5 | 100/150/1 |
| 10W | 395mm*415mm | Cutting | Basswood | 8 | 100/230/3 |
| 10W | 395mm*415mm | Cutting | Bamboo | 5 | 100/230/3 |
| 10W | 395mm*415mm | Cutting | Black acrylic | 4.5 | 100/120/2 |
| 10W | 395mm*415mm | Cutting | Kraft paper | 0.2 | 100/3500/1 |
| 10W | 395mm*415mm | Cutting | Red card paper | 0.2 | 100/3500/1 |
| 10W | 395mm*415mm | Cutting | Red felt | 0.8 | 100/3500/1 |
| 10W | 395mm*415mm | Cutting | Brown leather | 0.65 | 100/1500/1 |
Note:
1. Please ensure that the focal length of the laser module is correct and the lens of the laser module is clean when powered off(It can be clean with the dustless cloth and alcohol).
2. The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect.
3. The bottom surface of the cutting place should be suspended when cutting.You should protect the workbench (such as using steel plates or other materials that are not easily penetrated by laser).
| Laser Power | Engraving Size | Processing Mode | Material | Thickness (mm) | Power (%)/Speed (mm/min)/Pass |
|---|---|---|---|---|---|
| 20W | 395mm*415mm | Engraving | Basswood | 2.8 | 40/24000/1 |
| 20W | 395mm*415mm | Engraving | Red Beech | 3.5 | 40/24000/1 |
| 20W | 395mm*415mm | Engraving | White Oak | 3.6 | 40/24000/1 |
| 20W | 395mm*415mm | Engraving | Red Cherry Wood | 3.2 | 20/24000/1 |
| 20W | 395mm*415mm | Engraving | Red Oak | 3.5 | 30/24000/1 |
| 20W | 395mm*415mm | Engraving | Rosewood | 3.3 | 20/24000/1 |
| 20W | 395mm*415mm | Engraving | Birch | 3 | 80/24000/1 |
| 20W | 395mm*415mm | Engraving | Rubber Wood | 3.2 | 50/21000/1 |
| 20W | 395mm*415mm | Engraving | Walnut Wood | 3.6 | 80/21000/1 |
| 20W | 395mm*415mm | Engraving | Maple | 3 | 40/24000/1 |
| 20W | 395mm*415mm | Engraving | Dark Brown Leather | 1.4 | 100/16500/1 |
| 20W | 395mm*415mm | Engraving | Sky Blue Leather | 1.0 | 70/16500/1 |
| 20W | 395mm*415mm | Engraving | Light Brown Leather | 1.8 | 60/24000/1 |
| 20W | 395mm*415mm | Engraving | Green Leather | 1.0 | 100/24000/1 |
| 20W | 395mm*415mm | Engraving | Orange Leather | 1.8 | 100/16500/1 |
| 20W | 395mm*415mm | Engraving | Black Acrylic | 2.6 | 60/21000/1 |
| 20W | 395mm*415mm | Engraving | Aluminum | 0.9 | 100/6000/1 |
| 20W | 395mm*415mm | Engraving | Stainless Steel | 0.9 | 100/3000/1 |
| Laser Power | Engraving Size | Processing Mode | Material | Thickness (mm) | Power (%)/Speed (mm/min)/Pass |
|---|---|---|---|---|---|
| 20W | 395mm*415mm | Cutting | Basswood | 2.8 | 100/500/1 |
| 20W | 395mm*415mm | Cutting | Red Beech | 3.5 | 100/400/1 |
| 20W | 395mm*415mm | Cutting | White Oak | 3.6 | 100/400/1 |
| 20W | 395mm*415mm | Cutting | Red Cherry Wood | 3.2 | 100/700/1 |
| 20W | 395mm*415mm | Cutting | Red Oak | 3.5 | 100/300/1 |
| 20W | 395mm*415mm | Cutting | Rosewood | 3.3 | 100/100/1 |
| 20W | 395mm*415mm | Cutting | Birch | 3 | 100/400/1 |
| 20W | 395mm*415mm | Cutting | Rubber Wood | 3.2 | 100/300/1 |
| 20W | 395mm*415mm | Cutting | Walnut Wood | 3.6 | 100/400/1 |
| 20W | 395mm*415mm | Cutting | Maple | 3 | 100/500/1 |
| 20W | 395mm*415mm | Cutting | Dark Brown Leather | 1.4 | 50/900/1 |
| 20W | 395mm*415mm | Cutting | Sky Blue Leather | 1.0 | 50/900/1 |
| 20W | 395mm*415mm | Cutting | Light Brown Leather | 1.8 | 50/500/1 |
| 20W | 395mm*415mm | Cutting | Green Leather | 1.0 | 50/900/1 |
| 20W | 395mm*415mm | Cutting | Orange Leather | 1.8 | 50/500/1 |
| 20W | 395mm*415mm | Cutting | Black Acrylic | 2.6 | 100/200/1 |
Note:
1. Please ensure that the focal length of the laser module is correct and the lens of the laser module is clean when powered off(It can be clean with the dustless cloth and alcohol).
2. The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect.
3. The bottom surface of the cutting place should be suspended when cutting.You should protect the workbench (such as using steel plates or other materials that are not easily penetrated by laser).
| Laser Power | Engraving Size | Processing Mode | Material | Thickness (mm) | Power (%)/Speed (mm/min)/Pass |
|---|---|---|---|---|---|
| 40W | 395mm*415mm | Line Engraving | Basswood | 2.8 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Red Beech | 3.5 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | White Oak | 3.6 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Red Cherry Wood | 3.2 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Red Oak | 3.5 | 13/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Red Rosewood | 3.3 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Birch | 3 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Rubber Wood | 3.2 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Black Walnut Wood | 3.6 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Maple | 3 | 13/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Pinus sylvestris | 3 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Black Acrylic | 2.6 | 20/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Red/White | 2.6 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Green/White | 2.6 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Black/Yellow | 2.6 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Black/White | 2.6 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Black/Blue | 2.6 | 5/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Black/Red | 2.6 | 5/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Black/Green | 2.6 | 10/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Brown/Silver | 2.6 | 3/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Blue/Gold | 2.6 | 5/24000/1 |
| 40W | 395mm*415mm | Line Engraving | Bamboo/Black | 2.6 | 5/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Basswood | 2.8 | 10/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Red Beech | 3.5 | 10/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | White Oak | 3.6 | 10/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Red Cherry Wood | 3.2 | 10/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Red Oak | 3.5 | 13/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Red Rosewood | 3.3 | 10/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Birch | 3 | 10/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Rubber Wood | 3.2 | 10/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Black Walnut Wood | 3.6 | 10/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Maple | 3 | 13/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Pinus sylvestris | 3 | 10/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Black Acrylic | 2.6 | 18/20000/1 |
| 40W | 395mm*415mm | Fill Engraving | Red/White | 2.6 | 10/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Green/White | 2.6 | 10/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Black/Yellow | 2.6 | 5/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Black/White | 2.6 | 10/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Black/Blue | 2.6 | 5/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Black/Red | 2.6 | 5/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Black/Green | 2.6 | 10/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Brown/Silver | 2.6 | 3/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Blue/Gold | 2.6 | 5/24000/1 |
| 40W | 395mm*415mm | Fill Engraving | Bamboo/Black | 2.6 | 5/24000/1 |
| 40W | 395mm*415mm | Cutting | Basswood | 2.8 | 100/600/1 |
| 40W | 395mm*415mm | Cutting | Red Beech | 3.5 | 100/600/1 |
| 40W | 395mm*415mm | Cutting | White Oak | 3.6 | 100/600/1 |
| 40W | 395mm*415mm | Cutting | Red Cherry Wood | 3.2 | 100/600/1 |
| 40W | 395mm*415mm | Cutting | Red Oak | 3.5 | 100/600/1 |
| 40W | 395mm*415mm | Cutting | Red Rosewood | 3.3 | 100/600/1 |
| 40W | 395mm*415mm | Cutting | Birch | 3 | 100/600/1 |
| 40W | 395mm*415mm | Cutting | Rubber Wood | 3.2 | 100/600/1 |
| 40W | 395mm*415mm | Cutting | Black Walnut Wood | 3.6 | 100/600/1 |
| 40W | 395mm*415mm | Cutting | Maple | 3 | 100/600/1 |
| 40W | 395mm*415mm | Cutting | Pinus sylvestris | 3 | 100/600/1 |
| 40W | 395mm*415mm | Cutting | Black Acrylic | 2.6 | 100/400/1 |
| 40W | 395mm*415mm | Cutting | Red/White | 2.6 | 100/500/1 |
| 40W | 395mm*415mm | Cutting | Green/White | 2.6 | 100/500/1 |
| 40W | 395mm*415mm | Cutting | Black/Yellow | 2.6 | 100/500/1 |
| 40W | 395mm*415mm | Cutting | Black/White | 2.6 | 100/500/1 |
| 40W | 395mm*415mm | Cutting | Black/Blue | 2.6 | 100/500/1 |
| 40W | 395mm*415mm | Cutting | Black/Red | 2.6 | 100/500/1 |
| 40W | 395mm*415mm | Cutting | Black/Green | 2.6 | 100/500/1 |
| 40W | 395mm*415mm | Cutting | Brown/Silver | 2.6 | 30/3500/1 |
| 40W | 395mm*415mm | Cutting | Blue/Gold | 2.6 | 50/8000/1 |
| 40W | 395mm*415mm | Cutting | Bamboo/Black | 2.6 | 50/8000/1 |
Note:
1. Please ensure that the focal length of the laser module is correct and the lens of the laser module is clean when powered off(It can be clean with the dustless cloth and alcohol).
2. The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect.
3. The bottom surface of the cutting place should be suspended when cutting.You should protect the workbench (such as using steel plates or other materials that are not easily penetrated by laser).
| Laser Power | Engraving Size | Processing Mode | Material | Thickness (mm) | Power (%)/Speed (mm/min)/Pass |
|---|---|---|---|---|---|
| 5W | 400mm*415mm | Engraving | Linden plywood | 2 | 70/6000/1 |
| 5W | 400mm*415mm | Engraving | Bamboo | 5 | 75/6000/1 |
| 5W | 400mm*415mm | Engraving | Kraft paper | 0.2 | 45/6000/1 |
| 5W | 400mm*415mm | Engraving | Red card paper | 0.2 | 28/6000/1 |
| 5W | 400mm*415mm | Engraving | Red asphalt felt | 0.8 | 22/6000/1 |
| 5W | 400mm*415mm | Engraving | Brown leather | 0.65 | 45/6000/1 |
| 5W | 400mm*415mm | Engraving | Black acrylic | 4.5 | 95/3500/1 |
| 5W | 400mm*415mm | Engraving | Anodized aluminum | 3 | 100/100/1 |
| 5W | 400mm*415mm | Engraving | White Tile Painted Black | 6 | 95/2000/1 |
| 5W | 400mm*415mm | Cutting | Linden plywood | 2 | 100/300/1 |
| 5W | 400mm*415mm | Cutting | Linden plywood | 2.5 | 100/260/3 |
| 5W | 400mm*415mm | Cutting | Linden plywood | 4 | 100/220/3 |
| 5W | 400mm*415mm | Cutting | Linden plywood | 5 | 100/220/4 |
| 5W | 400mm*415mm | Cutting | Bamboo | 5 | 100/220/4 |
| 5W | 400mm*415mm | Cutting | Kraft paper | 0.2 | 100/1800/1 |
| 5W | 400mm*415mm | Cutting | Red card paper | 0.2 | 100/3500/1 |
| 5W | 400mm*415mm | Cutting | Red asphalt felt | 0.8 | 100/1800/1 |
| 5W | 400mm*415mm | Cutting | Brown leather | 0.65 | 100/800/1 |
Note:
1. Please ensure that the focal length of the laser module is correct and the lens of the laser module is clean when powered off(It can be clean with the dustless cloth and alcohol).
2. The parameters are for reference only because the color of the material is different and it will lead to a different effect. You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect.
| Laser Power | Engraving Size | Processing Mode | Material | Thickness (mm) | Power (%)/Speed (mm/min)/Pass |
|---|---|---|---|---|---|
| 10W | 400mm*415mm | Engraving | Basswood | 2 | 40/3000/1 |
| 10W | 400mm*415mm | Engraving | Bamboo | 5 | 40/3000/1 |
| 10W | 400mm*415mm | Engraving | Kraft paper | 0.2 | 25/3000/1 |
| 10W | 400mm*415mm | Engraving | Red card paper | 0.2 | 25/3000/1 |
| 10W | 400mm*415mm | Engraving | Red felt | 0.8 | 15/3000/1 |
| 10W | 400mm*415mm | Engraving | Brown leather | 0.65 | 20/3000/1 |
| 10W | 400mm*415mm | Engraving | Black acrylic | 4.5 | 50/3000/1 |
| 10W | 400mm*415mm | Engraving | Anodized aluminum | 3 | 100/200/1 |
| 10W | 400mm*415mm | Engraving | Stainless steel | 2 | 100/500/1 |
| 10W | 400mm*415mm | Engraving | White Tile Painted Black | 6 | 95/3800/1 |
| 10W | 400mm*415mm | Cutting | Basswood | 2 | 100/350/3 |
| 10W | 400mm*415mm | Cutting | Basswood | 4 | 100/200/1 |
| 10W | 400mm*415mm | Cutting | Basswood | 5 | 100/150/1 |
| 10W | 400mm*415mm | Cutting | Basswood | 8 | 100/230/3 |
| 10W | 400mm*415mm | Cutting | Bamboo | 5 | 100/230/3 |
| 10W | 400mm*415mm | Cutting | Black acrylic | 4.5 | 100/120/2 |
| 10W | 400mm*415mm | Cutting | Kraft paper | 0.2 | 100/3500/1 |
| 10W | 400mm*415mm | Cutting | Red card paper | 0.2 | 100/3500/1 |
| 10W | 400mm*415mm | Cutting | Red felt | 0.8 | 100/3500/1 |
| 10W | 400mm*415mm | Cutting | Brown leather | 0.65 | 100/1500/1 |
Note:
1. Please ensure that the focal length of the laser module is correct and the lens of the laser module is clean when powered off(It can be clean with the dustless cloth and alcohol).
2. The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect.
3. The bottom surface of the cutting place should be suspended when cutting.You should protect the workbench (such as using steel plates or other materials that are not easily penetrated by laser).

